OTOMATİK KONTROL PROGRAMME COURSE DESCRIPTION

Code	Name of the Course Unit	Semester	In-Class Hours (T+P)	Credit	ECTS Credit
ETP220	OTOMATİK KONTROL	3	2	2	5

GENERAL INFORMATION
Language of Instruction :	Turkish
Level of the Course Unit :	ASSOCIATE DEGREE, TYY: + 5.Level, EQF-LLL: 5.Level, QF-EHEA: Short Cycle
Type of the Course :	Elective
Mode of Delivery of the Course Unit	-
Coordinator of the Course Unit	Lecturer FUNDA ATEŞ
Instructor(s) of the Course Unit	Lecturer BETÜL GENÇASLAN
Course Prerequisite	No

OBJECTIVES AND CONTENTS
Objectives of the Course Unit:	To teach the design and application of industrial control systems that are part of a modern society.
Contents of the Course Unit:	Automatic control, its importance, its place in automation and its use. Open and closed loop concepts. Laplace Transformations. System dynamics and mathematical model concept, linearization. Block diagram, block algebra, open loop, feed forward and feedback concept. Removal of Transfer Functions of mechanical system elements. Fluid system elements, Thermal system elements. The concept of temporary and permanent response of dynamic systems, responses of first order systems. Response curves of quadratic systems. Simulation of first and second order systems with MATLAB. Basic control effects and controller types used in automatic control: on-off, P, PI, PD, PID. Lab. Application: Realization of hydraulic position control with PID card. Lab. Application: Computer controlled servomotor speed control system application. Use in PLC and automation systems. Lab on MPS unit. Application.

KEY LEARNING OUTCOMES OF THE COURSE UNIT (On successful completion of this course unit, students/learners will or will be able to)
Express the importance of automatic control in automation systems.
It establishes and implements a circuit that provides precise position control.
Makes the selection of the elements that make up the closed control loop suitable for the desired system.

WEEKLY COURSE CONTENTS AND STUDY MATERIALS FOR PRELIMINARY & FURTHER STUDY
Week	Preparatory	Topics(Subjects)	Method
1	-	Automatic control, its importance, its place in automation and its use.	-
2	-	Laplace transforms, inverse Laplace transforms.	-
3	-	System dynamics and mathematical model concept, linearization.	-
4	-	Block diagram, block algebra, open loop, feed forward and feedback concept.	-
5	-	Removal of Transfer Functions of mechanical system elements.	-
6	-	The concept of temporary and permanent response of dynamic systems, responses of first order systems.	-
7	-	The concept of temporary and permanent response of dynamic systems, responses of first order systems.	-
8	-	MID-TERM EXAM	-
9	-	Response curves of quadratic systems	-
10	-	Basic control effects and controller types used in automatic control. on-off, P, PI, PD, PID.	-
11	-	Basic control effects and controller types used in automatic control. on-off, P, PI, PD, PID.	-
12	-	Basic control effects and controller types used in automatic control. on-off, P, PI, PD, PID.	-
13	-	Basic control effects and controller types used in automatic control. on-off, P, PI, PD, PID.	-
14	-	Basic control effects and controller types used in automatic control. on-off, P, PI, PD, PID.	-
15	-	Basic control effects and controller types used in automatic control. on-off, P, PI, PD, PID.	-
16	-	FINAL EXAM	-
17	-	FINAL EXAM	-

SOURCE MATERIALS & RECOMMENDED READING

ASSESSMENT
Assessment & Grading of In-Term Activities	Number of Activities	Degree of Contribution (%)	Description

Level of Contribution
0	1	2	3	4	5

KNOWLEDGE
Theoretical
	Programme Learning Outcomes	Level of Contribution
		0	1	2	3	4	5
1	To be able to recognize the basic functions of electronic circuit components and their behavior in the circuit.	0
2	Recognizing the physical strength limits of electronic circuit components and determining operating conditions accordingly.	0
3	Ability to make applications related to equations, inequalities and functions.		1
4	Making basic circuit solutions.	0
5	Calculating the effects of direct current on circuit elements.			2
6	Calculating the effects of alternating current on circuit elements.	0

KNOWLEDGE
Factual
	Programme Learning Outcomes	Level of Contribution
		0	1	2	3	4	5
1	Having knowledge about operating systems and computer hardware.	0
2	To recognize electrical-electronic measuring instruments, their working principles and to make measurements using these instruments.	0
3	To have knowledge about electronic circuit elements, digital and analog systems and the operation of these systems.		1
4	To have knowledge about oscillators and oscillator circuits.	0

SKILLS
Cognitive
	Programme Learning Outcomes	Level of Contribution
		0	1	2	3	4	5
1	To be able to produce solutions by using the acquired theoretical and experimental knowledge in a cause and effect relationship to possible problems encountered.	0
2	To be able to produce solutions using basic knowledge about the design and control of control-based functions in electronic circuits and systems.	0
3	To be able to have sufficient knowledge of the English language to conduct research using keywords for electronic systems and components, and to be able to decide on material selection by understanding catalog data.	0
4	Designing algorithms and flow diagrams.			2
5	To detect and analyze an existing system, system component or process and, when necessary, to design basic devices to meet the desired needs.		1

SKILLS
Practical
	Programme Learning Outcomes	Level of Contribution
		0	1	2	3	4	5
1	To be able to use selected computer-aided electronic design programs at a basic level for simulation and printed circuit creation.	0
2	Identifying the necessary measuring devices and methods in electronic circuits and systems and using them to identify errors and malfunctions with the help of signal tracking and measurement techniques, and to be able to eliminate them when the necessary equipment is provided.	0
3	To measure basic electrical quantities.	0
4	To be able to use transistor as switching and amplifier element.				3
5	Drawing and simulating computer-aided electrical and electronic circuit diagrams.	0
6	Writing programs for microcontroller.	0
7	Writing the program for programmable logic controllers.	0

OCCUPATIONAL
Autonomy & Responsibility
	Programme Learning Outcomes	Level of Contribution
		0	1	2	3	4	5
1	To have knowledge about occupational safety and its applications and to be able to implement them.	0
2	To be able to make decisions in independent work, to take initiative and adapt in teamwork with people within and outside the profession.	0
3	Demonstrate that you can learn independently and apply what you have learned in the field of electronic technology.	0
4	To identify, define and solve problems related to unforeseen situations in studies related to the field of electronic technology and to select and apply simulation and modeling techniques along with appropriate practical methods.	0

OCCUPATIONAL
Learning to Learn
	Programme Learning Outcomes	Level of Contribution
		0	1	2	3	4	5
1	To be able to access information, research resources for this purpose and use various information sources.	0
2	Knowing a foreign language at a level that allows you to communicate with colleagues and customers and being able to effectively follow the developments in your field	0
3	To have the ability to measure, analyze, interpret experimental data and reach a valid scientific conclusion from the data.	0
4	To demonstrate that one has gained the ability to identify problems related to unforeseen situations and seek solutions in studies related to the field of electronic technology.	0

OCCUPATIONAL
Communication & Social
	Programme Learning Outcomes	Level of Contribution
		0	1	2	3	4	5
1	To have knowledge and awareness of social responsibility, ethical values, social security rights, occupational health and safety on issues related to the field.	0
2	To be able to use current computer requirements such as words, operations, spreadsheets, presentations, e-mail and internet browsing at a good level in the professional field.	0
3	To be able to apply the basic knowledge acquired on employee rights, human rights, quality and professional ethics to working life.	0

OCCUPATIONAL
Occupational and/or Vocational
	Programme Learning Outcomes	Level of Contribution
		0	1	2	3	4	5
1	To be able to write a technical report on the professional subject he/she is working on, to present the requested work based on a written explanation, and to conduct needs analysis.	0
2	To have the awareness of observing social, scientific and moral values in matters related to the profession.	0
3	To have knowledge and skills in a field built on the competencies gained in general or vocational education and to demonstrate understanding of the basic concepts in that field.	0
4	To be able to produce services and products in electronics technician work areas, taking into account scientific values and professional ethics.	0

WORKLOAD & ECTS CREDITS OF THE COURSE UNIT
Workload for Learning & Teaching Activities
Type of the Learning Activites	Learning Activities (# of week)	Duration (hours, h)	Workload (h)
Lecture & In-Class Activities	14	2	28
Preliminary & Further Study	14	3	42
Land Surveying	0	0	0
Group Work	0	0	0
Laboratory	0	0	0
Reading	14	3	42
Assignment (Homework)	0	0	0
Project Work	0	0	0
Seminar	0	0	0
Internship	0	0	0
Technical Visit	0	0	0
Web Based Learning	0	0	0
Implementation/Application/Practice	0	0	0
Practice at a workplace	0	0	0
Occupational Activity	0	0	0
Social Activity	0	0	0
Thesis Work	0	0	0
Field Study	0	0	0
Report Writing	0	0	0
Final Exam	1	1	1
Preparation for the Final Exam	1	6	6
Mid-Term Exam	1	1	1
Preparation for the Mid-Term Exam	1	6	6
Short Exam	0	0	0
Preparation for the Short Exam	0	0	0
TOTAL	46	0	126