GAZ TÜRBİNLİ MOTORLAR VE UYGULAMALARI III DERS TANITIM VE UYGULAMA BİLGİLERİ

Kodu	Dersin Adı	Yarıyıl	Süresi(T+U)	Kredisi	AKTS Kredisi
GMY443	GAZ TÜRBİNLİ MOTORLAR VE UYGULAMALARI III	7	8	6	7

DERS BİLGİLERİ
Dersin Öğretim Dili :	Türkçe
Dersin Düzeyi	BACHELOR'S DEGREE, TYY: + 6.Level, EQF-LLL: 6.Level, QF-EHEA: First Cycle
Dersin Türü	Zorunlu
Dersin Veriliş Şekli	-
Dersin Koordinatörü	Assist.Prof. SİNEM GÜRKAN
Dersi Veren Öğretim Üyesi/Öğretim Görevlisi
Ders Ön Koşulu	Yok

AMAÇ VE İÇERİK
Amaç:	This course aims to provide comprehensive knowledge of the components, systems, and applications of gas turbine engines. Students will gain an understanding of the engine's air, ignition, indicator, and power augmentation systems, as well as the structure and operating principles of turboshaft and turbo-prop engines, thereby grasping the maintenance and repair processes.
İçerik:	This course covers key components of the engine, including air systems, starting and ignition systems, engine indicators, and power augmentation systems. The operation of air distribution, cooling, and anti-icing control systems is detailed. Additionally, the functioning of the starting and ignition systems, along with maintenance safety concerns, are addressed. Engine indicators, including parameters such as oil pressure, temperature measurements, vibration, and torque, are discussed in terms of monitoring. The structures of turbo-prop and turboshaft engines are also part of the course content. This course enables students to effectively work in maintenance and repair by understanding the various systems of gas turbine engines.

DERSİN ÖĞRENME ÇIKTILARI (Öğrenciler, bu dersi başarı ile tamamladıklarında aşağıda belirtilen bilgi, beceri ve/veya yetkinlikleri gösterirler.)
The operation of engine air distribution and anti-icing control systems, including internal cooling, sealing, and external air servicing, will be understood.
The student will interpret the functioning of engine instrumentation systems, including monitoring parameters such as exhaust gas temperature, engine thrust, oil pressure, fuel flow, engine speed, vibration, torque, and power.
The student will understand the structure and operation of turbo-prop engines, including the distinction between gas-coupled and gear-coupled turbines, reduction gears, integrated engine and propeller control systems, and over-speed protection devices.
The student will comprehend the adjustments, drive systems, reduction gear assemblies, couplings, and control systems of turbo-shaft engines.

HAFTALIK DERS KONULARI VE ÖNGÖRÜLEN HAZIRLIK ÇALIŞMALARI
Hafta	Ön Hazırlık	Konular	Yöntem
1	-	15.12 Air Systems This section covers the operation of engine air distribution and anti-icing control systems, including internal cooling, sealing, and external air services.	-
2	-	15.12 Air Systems This section covers the operation of engine air distribution and anti-icing control systems, including internal cooling, sealing, and external air services.	-
3	-	15.13 Starting/Starting and Ignition Systems This topic addresses the operation of the engine starting system and its components, as well as the ignition systems and their components. Additionally, it discusses the safety requirements related to maintenance.	-
4	-	15.13 Starting/Starting and Ignition Systems This topic addresses the operation of the engine starting system and its components, as well as the ignition systems and their components. Additionally, it discusses the safety requirements related to maintenance.	-
5	-	15.14 Engine Indicator Systems This section focuses on engine monitoring, including exhaust gas temperature, inter-stage turbine temperature, engine thrust indicators, engine pressure ratio, turbine discharge pressure, or jet (exhaust) pipe pressure systems. It also includes monitoring of oil pressure and temperature, fuel pressure and flow, engine speed, vibration measurements, torque, and power.	-
6	-	15.14 Engine Indicator Systems This section focuses on engine monitoring, including exhaust gas temperature, inter-stage turbine temperature, engine thrust indicators, engine pressure ratio, turbine discharge pressure, or jet (exhaust) pipe pressure systems. It also includes monitoring of oil pressure and temperature, fuel pressure and flow, engine speed, vibration measurements, torque, and power.	-
7	-	15.14 Engine Indicator Systems This section focuses on engine monitoring, including exhaust gas temperature, inter-stage turbine temperature, engine thrust indicators, engine pressure ratio, turbine discharge pressure, or jet (exhaust) pipe pressure systems. It also includes monitoring of oil pressure and temperature, fuel pressure and flow, engine speed, vibration measurements, torque, and power.	-
8	-	MID-TERM EXAM	-
9	-	15.15 Power Augmentation Systems This section covers the operation and application of power augmentation systems, including water injection, water-methanol injection, and auxiliary burner systems.	-
10	-	15.15 Power Augmentation Systems This section covers the operation and application of power augmentation systems, including water injection, water-methanol injection, and auxiliary burner systems.	-
11	-	15.16 Turbo-prop Engines This topic addresses gas-coupled (free turbine) and gear-coupled turbines, reduction gear systems, integrated engine and propeller controls, and overspeed protection devices.	-
12	-	15.16 Turbo-prop Engines This topic addresses gas-coupled (free turbine) and gear-coupled turbines, reduction gear systems, integrated engine and propeller controls, and overspeed protection devices.	-
13	-	15.16 Turbo-prop Engines This topic addresses gas-coupled (free turbine) and gear-coupled turbines, reduction gear systems, integrated engine and propeller controls, and overspeed protection devices.	-
14	-	15.17 Turbo-shaft Engines This section covers the adjustments, drive systems, reduction gear arrangements, couplings, and control systems specific to turbo-shaft engines.	-
15	-	15.17 Turbo-shaft Engines This section covers the adjustments, drive systems, reduction gear arrangements, couplings, and control systems specific to turbo-shaft engines.	-
16	-	FINAL EXAM	-
17	-	FINAL EXAM	-

KAYNAKLAR
EASA PART 66 MODULE 15 GAS TURBINE ENGINES

ÖLÇME VE DEĞERLENDİRME
Yarıyıl İçi Yapılan Çalışmaların Ölçme ve Değerlendirmesi	Etkinlik Sayısı	Katkı Yüzdesi	Açıklama	Sınav Yapılma Şekli

(0) Etkisiz	(1) En Düşük	(2) Düşük	(3) Orta	(4) İyi	(5) Çok İyi
0	1	2	3	4	5

KNOWLEDGE
Theoretical
	Program Yeterlilikleri/Çıktıları	Katkı Düzeyi
		0	1	2	3	4	5
1	Define the basic concepts of aeronautical standards and rules. (Bloom 1)				3

KNOWLEDGE
Factual
	Program Yeterlilikleri/Çıktıları	Katkı Düzeyi
		0	1	2	3	4	5
1	Organize teamwork during the collection, interpretation, announcement and application of data related to the field. (Bloom 6)					4

SKILLS
Cognitive
	Program Yeterlilikleri/Çıktıları	Katkı Düzeyi
		0	1	2	3	4	5
1	Perform theoretical and practical knowledge related to his/her field in business life using analytical methods and modeling techniques. (Bloom 4)						5
2	Use maintenance manuals and other sources of information in business life to obtain information about the field. (Bloom3)				3
3	Determine the actualities of all technical and administrative documents related with the field. (Bloom 1)					4
4	Perform theoretical and practical knowledge related to his/her field in business life using analytical methods and modeling techniques. (Bloom 4)			2

SKILLS
Practical
	Program Yeterlilikleri/Çıktıları	Katkı Düzeyi
		0	1	2	3	4	5
1	Use computer software, information and communication technologies at the level required by the field. (Bloom 3)		1
2	Interpret the sketches, scheme, graphics that describe the subject. (Bloom 2)				3

OCCUPATIONAL
Autonomy & Responsibility
	Program Yeterlilikleri/Çıktıları	Katkı Düzeyi
		0	1	2	3	4	5
1	Develop solutions for problems faced during application. (Bloom 6)					4

OCCUPATIONAL
Learning to Learn
	Program Yeterlilikleri/Çıktıları	Katkı Düzeyi
		0	1	2	3	4	5
1	Determine the learning requirements related with his/her field. (Bloom 3)				3
2	Use the lifelong learning principles in occupational development. (Bloom 3)				3

OCCUPATIONAL
Communication & Social
	Program Yeterlilikleri/Çıktıları	Katkı Düzeyi
		0	1	2	3	4	5
1	Apply the technical drawing knowledge effectively in business life. (Bloom 3)					4
2	By informing the relevant persons and institutions about the related field; state his / her thoughts and suggestions for solutions in the field.(Bloom 1)					4
3	Debate his/her ideas and solution suggestions with experts by supporting them with quantitative and qualitative data. (Bloom 2)				3
4	Participate in training related to the field at international level. (Bloom 3)						5
5	Organize activities for the professional development of employees under his/her responsibility. (Bloom 6).			2

OCCUPATIONAL
Occupational and/or Vocational
	Program Yeterlilikleri/Çıktıları	Katkı Düzeyi
		0	1	2	3	4	5
1	Use the knowledge and skills obtained during undergraduate education in work life. (Bloom 3)				3
2	Solve the problems encountered in his/her field. (Bloom 3)					4
3	Apply the necessary culture of behavior in the areas of quality management and processes and environmental protection and occupational safety (Bloom 3)			2
4	Locate the awareness of safety factor to himself and to the team. (Bloom 1)						5

DERSİN İŞ YÜKÜ VE AKTS KREDİSİ
Öğrenme-Öğretme Etkinlikleri İş Yükü
Öğrenme-Öğretme Etkinlikleri	Etkinlik(hafta sayısı)	Süresi(saat sayısı)	Toplam İş Yükü
Lecture & In-Class Activities	14	8	112
Preliminary & Further Study	14	4	56
Land Surveying	0	0	0
Group Work	0	0	0
Laboratory	0	0	0
Reading	0	0	0
Assignment (Homework)	0	0	0
Project Work	0	0	0
Seminar	0	0	0
Internship	0	0	0
Technical Visit	0	0	0
Web Based Learning	0	0	0
Implementation/Application/Practice	0	0	0
Practice at a workplace	0	0	0
Occupational Activity	0	0	0
Social Activity	0	0	0
Thesis Work	0	0	0
Field Study	0	0	0
Report Writing	0	0	0
Final Exam	1	1	1
Preparation for the Final Exam	1	8	8
Mid-Term Exam	1	1	1
Preparation for the Mid-Term Exam	0	0	0
Short Exam	0	0	0
Preparation for the Short Exam	0	0	0
TOTAL	31	0	178